Understanding Energy: FAQ
As you are navigating the idea of switching energy companies, you might have a lot of questions. Constellation is happy to answer any question that may arise to help you with understanding energy choice, understanding solar energy and more. If you have questions like “What is renewable energy?” or “How do I switch electric companies?” read on to see if we have the answers that you need below. We want you to feel well informed and confident in your choices as you make important decisions that will affect your budget.
What is cogeneration?
The production of electricity and another form of useful energy (such as heat or steam) used for industrial, commercial, heating or cooling purposes. The use of waste heat from an electrical generating plant for other purposes, such as heating. Also, the use of waste heat from a high-temperature industrial process to generate electricity.
What is an electric current?
A flow of electrons in an electrical conductor. The strength or rate of movement of the electricity is measured in amperes.
What is electricity?
A property of matter created by the movement of electrons. This "movement" is initiated usually by a generator fueled by any number of energy resources such as coal, uranium, water (hydropower), or directly converted from solar radiation in photovoltaic cells. Electricity is not energy per se, but the "carrier" of energy that originates in fossil fuel and renewable energy sources.
What is electricity generation?
The process of producing electric energy or transforming other forms of energy into electric energy. Also, the amount of electric energy produced or expressed in watt-hours (Wh).
What is energy?
Energy is the capacity for doing work. Energy has several forms, some of which are easily convertible and can be changed to another form useful for work. Most of the world's convertible energy comes from fossil fuels that are burned to produce heat that is then used as a transfer medium to mechanical or other means in order to accomplish tasks. Electrical energy is usually measured in kilowatt-hours, while heat energy is usually measured in British thermal units.
What is energy conservation?
Actions that are taken to reduce or manage energy consumption in a cost-effective and efficient manner. Methods of reducing energy include using insulation, increasing energy efficiency and changing patterns of use.
What is energy consumption?
The use of energy as a source of heat or power or as an input in the manufacturing process. Energy consumption determined by multiplying the demand by the time period over which the energy was used. The kilowatt-hour is the typical unit of measure for energy consumption.
What is the greenhouse effect?
The increasing mean global surface temperature of the earth caused by gases in the atmosphere (including carbon dioxide, methane, nitrous oxide, ozone, and chlorofluorocarbon). The greenhouse effect allows solar radiation to penetrate but absorbs the infrared radiation returning to space.
Understanding Energy Units
What is the average revenue per kilowatt hour?
The average revenue per kilowatt-hour of electricity sold by sector (residential, commercial, industrial or other) and geographic area (State, Census division and national) is calculated by dividing the total monthly revenue by the corresponding total monthly sales for each sector and geographic area.
What does BCF mean?
BCF is the abbreviation for 1 billion cubic feet.
A BTU, or British thermal unit, is a unit of measurement that represents the amount of energy needed to heat a pound of water by one degree. This is an important measurement in understanding energy bills. A measure of energy in the English system measurement, roughly the amount of heat required to raise one pound of water one degree Fahrenheit at or near 39.2F. This unit of measuring heat will be replaced by the "joule."
What is a Decatherm (Dekatherm)?
Ten therms or 1 million BTU. One decatherm is equal to approximately 1,000 cubic feet (Mcf).
What is a gigawatt (GW)?
One billion watts.
What is a gigawatt hour (GWh)?
One billion watt hours.
What is a joule?
Named in honor of British physicist James P. Joule (rhymes with pool) who proved in 1843 that a specific amount of work was converted into a specific amount of heat. A joule (j) is now a unit for all forms of energy. One joule of work occurs when the force of one NEWTON is exerted on an object moving in the direction of the force, a distance of one meter. It takes about one joule to lift an apple over your head. As the transition from the English system of energy measurement to the international system of units (SI) picks up momentum, we will soon become accustomed to hearing more frequently of kilojoules (Kj) and megajoules (Mj). One kilowatt-hour = 3.6 x 106 joules. One calorie = 4.187 joules.
What is a kilowatt (kW)?
One thousand watts, measure of demand for power.
What is a kilowatt-hour (kWh)?
The standard unit of measure for electricity. The total number of kilowatt-hours charged to your bill is determined by your electricity use. Specifically, a kilowatt-hour is defined as the unit of energy that is expended in one hour by one kilowatt of power.
What does MCF mean?
One thousand cubic feet.
What is a megawatt (MW)?
One thousand kilowatts. This term is generally used to measure the generating capacity of power plants. The average size of U.S. power plants is approximately 200 MW. A unit of power equal to 1 million watts. Put another way, it's the amount of electric energy required to light 10,000, 10-watt bulbs.
What is a megawatt-hour (mWh)?
1 million watts used for one hour. If you purchased a megawatt-hour of energy for a nickel per kilowatt-hour, it would cost you 1,000 nickels, or $50. Using a kWh you could burn one, 100-watt incandescent for 24 hours a day for about 14 months, or 3 hours a day for over 9 years.
What does MMCF mean?
One million cubic feet.
What is a therm?
A unit of energy equivalent to 100,000 BTUs; usually used as a measure of the heat energy from burning natural gas (or methane).
What is a watt?
A unit of electric power equal to a current of one ampere flowing across an electrical circuit with a potential of one volt. A kilowatt is a unit of power equal to 1,000 watts.
What is a watt-hour (Wh)?
Understanding Energy Sources
What is biomass??
Organic non-fossil material of biological origin constituting a renewable energy source such as energy derived from plants. Alcohol fuels are produced from wood, sugarcane and corn. Firewood, crop residue and cattle dung can also be burned as sources of energy.
What is an energy source??
The primary source that provides the power that is converted to electricity through chemical, mechanical or other means. Energy sources include coal, petroleum and petroleum products, gas, water, uranium, wind, sunlight, geothermal and other sources.
What is fuel??
Any substance that can be burned to produce heat; also, materials that can be fissioned in a chain reaction to produce heat.
What is fuel consumption?
The amount of fuel used for gross generation, providing standby service, start-up and/or flame stabilization.
What is gas?
A fuel burned under boilers and by internal combustion engines for electric generation. These include natural, manufactured and waste gas.
What is green power?
Power that is generated from renewable energy sources. Specific definitions of green power vary in each state. Typically, wind, solar and biomass fuels are considered sources of green power.
What is hydrocarbon?
An organic chemical compound of hydrogen and carbon in the gaseous, liquid or solid phase. The molecular structure of hydrocarbon compounds varies from the simplest (methane, a constituent of natural gas) to the very heavy and very complex. Natural sources of hydrocarbons are the by-products of digestion and decomposition (e.g., rotting, spoiling, putrefying). Coal, natural gas, oil, sugar, starches and plastics are all composed of hydrocarbons. The incomplete combustion of hydrocarbons from fossil fuels contributes to our pollution and global warming problems.
What is geothermal energy?
Energy from the internal heat of the Earth, which may be residual heat, friction heat, or a result of radioactive decay. The heat is found in rocks and fluids at various depths and can be extracted by drilling or pumping.
What is geothermal power?
The natural heat of the Earth that is conducted or convected to the Earth's surface through volcanoes and hot springs. By harnessing this energy and using it to power steam turbines, we can convert geothermal energy into electricity that we can use.
What is liquefied natural gas (LNG)?
Natural gas that has been liquefied by lowering its temperature to negative 260 degrees Fahrenheit.
What is natural gas?
A gaseous mixture of hydrocarbon compounds, primarily methane, delivered via pipeline for consumption. It is used as a fuel for electricity generation, a variety of uses in buildings and as raw material input and fuel for industrial processes.
What is dry natural gas?
The marketable portion of natural gas production, which is obtained by subtracting extraction losses, including natural gas liquids removed at natural gas processing plants, from total production. This product, also referred to as consumer-grade natural gas, is the product that remains after wet natural gas has been processed at lease facilities and/or natural gas processing plants. This processing removes natural gas liquids and nonhydrocarbon gases (e.g., water vapor, carbon dioxide, helium, hydrogen sulfide, and nitrogen) that would otherwise make the gas unmarketable.
What is wet natural gas?
A mixture of hydrocarbon compounds and small quantities of various nonhydrocarbons existing in the gaseous phase or in solution with crude oil in porous rock formations at reservoir conditions. The principle hydrocarbons normally contained in the mixture are methane, ethane, propane, butane and pentanes. Typical non-hydrocarbon gases that may be present in reservoir natural gas are water vapor, carbon dioxide, helium, hydrogen sulfide and nitrogen. Under reservoir conditions, natural gas and the liquefiable portions occur either in a single gaseous phase in the reservoir or in solution with oil and are not distinguishable at the time as separate substances.
What is nuclear electric power?
Electricity generated by an electric power plant whose turbines are driven by steam generated in a reactor by heat from the fissioning of nuclear fuel.
What is nuclear energy?
Energy from the inner core or nucleus of the atom, as opposed to energy released in chemical processes, which derives from the electrons surrounding the nuclei. Nuclear fusion is the release of thermonuclear energy by the conversion of hydrogen nuclei to helium nuclei, in a continuing reaction in the sun and other stars. Nuclear fusion is the principle behind thermonuclear weapons. Attempts to harness fusion for commercial power production have so far not succeeded.
What are photovoltaic cells?
Used to directly convert solar radiation into electricity. Materials called semiconductors, usually made from pure silicon, transfer light energy (photons) into electrical energy in a process known as the photoelectric effect.
What is renewable energy?
Electricity generated from sources such as solar, wind and geothermal power rather than from fossil fuels. Renewable energy comes from naturally recurring sources.
What is solar energy?
Solar energy is energy that is harnessed from sunlight. It can be used for electrical power, heating water and other energy-related tasks. Understanding solar energy and implementing solar sources in your home can help to reduce overall energy costs.
What is wind energy?
The kinetic energy of wind converted into mechanical energy by wind turbines (i.e., blades rotating from a hub) that drive generators to produce electricity.
What is wood energy?
Understanding Energy Infrastructure
What is a base load plant?
A plant, usually housing high-efficiency steam-electric units, which is normally operated to take all or part of the minimum load of a system, and which consequently produces electricity at an essentially constant rate and runs continuously. These units are operated to maximize system mechanical and thermal efficiency and minimize system-operating costs.
What is a city gate?
The location where natural gas transfers from the interstate gas pipeline to the local utility's distribution system.
What is a combined cycle unit?
An electric generating unit that consists of one or more combustion turbines and one or more boilers with a portion of the required energy input to the boiler(s) provided by the exhaust gas of the combustion turbine(s).
What is distribution power?
A packaged power unit located at the point of demand. While the technology is still evolving, examples include fuel cells and photovoltaic cells.
What is a distribution system?
The portion of an electric system that is dedicated to delivering electric energy to an end user.
What is an electric power plant?
A station containing prime movers, electric generators, and auxiliary equipment for converting mechanical, chemical, and/or fission energy into electric energy.
What is an electric transmission system?
An interconnected group of electric transmission lines and associated equipment for moving or transferring electric energy in bulk between points of supply and points at which it is transformed for delivery over the distribution system lines to consumers, or is delivered to other electric systems.
What is a fossil-fuel plant?
A plant using coal, petroleum or gas as its source of energy.
What is a gas-turbine electric power plant?
A plant in which the prime mover is a gas turbine. A gas turbine typically consists of an axial-flow air compressor and one or more combustion chambers where liquid or gaseous fuel is burned. The hot gases expand to drive the generator and then are used to run the compressor.
What is a generating unit?
Any combination of physically connected generator(s), reactor(s), boiler(s), combustion turbine(s), or other prime mover(s) operated together to produce electric power.
What is a generator?
A machine that converts mechanical energy into electrical energy.
Want information on portable and standby electric generators? Check out our Generator Buying Guide for more info!
What is a geothermal plant?
A plant in which the prime mover is a steam turbine. The turbine is driven either by steam produced from hot water or by natural steam that derives its energy from heat found in rocks or fluids at various depths beneath the surface of the earth. Drilling and/or pumping extract the energy.
What is a hydroelectric plant?
A plant in which the turbine generators are driven by falling water.
What is a peak load plant?
A plant usually housing old, low-efficiency steam units; gas turbines; diesels; or pumped-storage hydroelectric equipment normally used during the peak-load periods.
What is a pumped-storage hydroelectric plant?
A plant that usually generates electric energy during peak-load periods by using water previously pumped into an elevated storage reservoir during off-peak periods when excess generating capacity is available to do so. When additional generating capacity is needed, the water can be released from the reservoir through a conduit to turbine generators is located in a power plant at a lower level.
What is a service area?
The geographic territory served by a utility.
What is a standby facility?
A facility that supports a utility system and is generally running under no-load. It is available to replace or supplement a facility normally in service.
What is a steam-electric plant (conventional)?
A plant in which the prime mover is a steam turbine. The steam used to drive the turbine is produced in a boiler where fossil fuels are burned.
What is a standby service?
Support service that is available as needed to supplement a consumer, a utility system or to another utility if a schedule or an agreement authorizes the transaction. The service is not regularly used.
What is substation?
Facility equipment that switches, changes or regulates electric voltage.
What is a transformer?
An electrical device for changing the voltage of alternating current.
What is a turbine?
An engine in which steam, water, gas, or air is made to spin a rotating shaft by pushing on angled blades, like a fan. Turbines are among the most powerful machines. Steam turbines drive generators in power stations and ships' propellers; water turbines spin the generators in hydroelectric power.
What is a wind turbine?
A windmill of advanced aerodynamic design connected to an electricity generator and used in wind power installations. Wind turbines can be either large propeller-type rotors mounted on a tall tower or flexible metal strips fixed to a vertical axle at top and bottom.?
Understanding the Energy Grid
What is advanced metering?
A device for recording or communicating actual electric use during minutes, hours, days or weeks useful for time-of-day, on-peak/off peak or other billing rates.
What are ancillary services?
Also abbreviated to AS, ancillary services are necessary to support the transmission of energy from resources to loads while maintaining reliable operation. They include reactive power supply, voltage support, regulation, and frequency control, among other things.
What is the base load?
The minimum energy level an electric plant must provide you on a constant basis.
What is the base load capacity?
The generating equipment normally operated to serve loads on an around-the-clock basis.
What are basic services?
Services that are necessary for the physical delivery of service, including generation, transmission, and distribution.
What is capability?
The maximum load that a generating unit, generating station or other electrical apparatus can carry under specified conditions for a given period of time without exceeding approved limits of temperature and stress.
What is capacity?
The amount of electric power delivered or required for which a generator, turbine, transformer, transmission circuit, station or system is rated by the manufacturer.
What is a cogenerator?
A generating facility that produces electricity and another form of useful thermal energy (such as heat or steam) used for industrial, commercial, heating or cooling purposes. To receive status as a qualifying facility (QF) under the Public Utility Regulatory Policies Act (PURPA), the facility must produce electric energy and "another form of useful thermal energy through the sequential use of energy," and meet certain ownership, operating, and efficiency criteria established by the Federal Energy Regulatory Commission (FERC). (See the Code of Federal Regulations, Title 18, Part 292.)
What is a combined cycle?
An electric generating technology in which electricity is produced from otherwise lost waste heat exiting from one or more gas (combustion) turbines. The exiting heat is routed to a conventional boiler or to a heat recovery steam generator for utilization by a steam turbine in the production of electricity. This process increases the efficiency of the electric generating unit.
What is electricity distribution?
The flow of electricity generally at lower voltages from transmission facilities to the ultimate customer — usually businesses and homes. The local wires, transformers, substations and other equipment used to deliver electricity for the electric distribution company to your home or business. The distribution charge is regulated by the PUC. This charge will vary based on how much electricity is used. The facilities of the electric system that deliver electricity from substations to customers. The distribution system "steps down" power from high-voltage transmission lines to a level that can be used in homes and businesses.
What is a forced outage?
The shutdown of a generating unit, transmission line or other facility, for emergency reasons or a condition in which the generating equipment is unavailable for load due to unanticipated breakdown.
What is a fuel chain?
The chain of activities involved in transforming energy into forms more convenient for society. This chain may include some or all of the following: fuel exploration, extraction, preparation, transportation, conversion to electricity, distribution and waste disposal.
What is a full-forced outage?
The net capability of main generating units that is unavailable for load for emergency reasons.
What is the grid?
The transportation highway over which electricity travels from supplier to customer. A network for the transmission of electricity throughout the state, region or nation. The term is also used to refer to the layout of an electric distribution system.
What is the grid operator?
The entity that oversees the delivery of electricity over the grid to the customer, while ensuring consistently high levels of reliability, and public and worker safety. The grid operator potentially could be independent of the utilities and suppliers.
What is gross generation?
The total amount of electric energy produced by the generating units at a generating station or stations, measured at the generator terminals.
What is a load?
The electric power used by devices connected to an electrical generating system. The amount of electric power required to meet customers' use in a given time period. The amount of electric power delivered or required at any specific point or points on a system. The requirement originates at the energy-consuming equipment of the consumers.
What is a load factor?
The ratio of average energy demand to maximum demand for a time period, such as one year, one month, or one hour. An end user with a high load factor uses energy at a consistently higher level year-round than an end user who may use energy specifically for heating or cooling.
What is load management?
Shifting use of electricity from periods of high demand to periods of lower demand, when the cost of electricity usually is lower.
What is a load profile?
Measurement of a customer's electricity usage over a period of time that shows how much and when a customer uses electricity. Load profiles can be used by REPs and transmission system operators to forecast electricity supply.
What is net generation?
Gross generation less than the electric energy consumed at the generating station for station use.
What is net generation?
Gross generation minus plant use from all electric utility owned plants. The energy required for pumping at a pumped-storage plant is regarded as plant use and must be deducted from the gross generation.
What is an outage?
The period during which a generating unit, transmission line or other facility is out of service.
What is a power exchange load?
Load that has been scheduled by the power exchange and which is received through the use of transmission or distribution facilities owned by participating transmission owners.
What is a power pool?
An arrangement between two or more interconnected electric utilities to coordinate the operation of their generating or transmission facilities, or both.
What is restructuring?
The reconfiguration of the vertically integrated electric utilities. Restructuring usually refers to separation of the various utility functions — transmission, distribution, generation and services — into individually operated and owned entities and the resulting creation of a competitive market for electricity supply.
What is a scheduled outage?
The shutdown of a generating unit, transmission line, or other facility, for inspection or maintenance, in accordance with an advance schedule.
What is a spinning reserve?
That reserve generating capacity running at a zero load and synchronized to the electric system.
What is transmission?
The flow of electricity over high voltage wires from power plants to local distribution lines. Interconnecting electric lines that move high voltage electricity from a generation facility to the distribution lines.
What is vertical integration?
An arrangement whereby the same company owns all the different aspects of making, selling, and delivering a product or service. In the electric industry, it refers to the historically common arrangement whereby a utility would own its own generating plants, transmission system, and distribution lines to provide all aspects of electric service.
What is a wheeling service?
A service provided by a utility that owns transmission facilities. Under a wheeling service agreement, the utility wheels, or transfers, electric energy from a generating source to a purchaser, which then resells it to its own retail customers. Energy can be wheeled for short distances, across an entire system or across several systems.
Understanding Energy Demand
What are actual peak load reductions?
The actual reduction in annual peak load (measured in kilowatts) achieved by consumers that participate in a utility Demand Side Management (DSM) program. It reflects the real changes in the demand for electricity resulting from a utility DSM program that is in effect at the same time the utility experiences its annual peak load, as opposed to the installed peak load reduction capability (i.e., Potential Peak Load Reduction). It should account for the regular cycling of energy efficient units during the period of annual peak load.
What is coincidental demand?
The sum of two or more demands that occur in the same time interval.
What is a coincidental peak load?
The sum of two or more peak loads that occur in the same time interval.
What is a daily peak?
A daily peak is the largest amount of energy that is used by a home or business within a specific, defined period of the day. This may be measured in an hour, 30-minute or 15-minute block for the day.
What is demand side management (DSM)?
Processes and investments in equipment made by power companies and commercial customers to reduce customer "demand" for electricity or to shift the customers use away from periods of high electrical demand.
What is energy congestion?
A condition that occurs when insufficient transfer capacity is available to implement all of the preferred schedules for electricity transmission simultaneously.
What is energy demand?
The amount of electricity that a customer uses at any given moment or averaged over period of time. Demand is usually in expressed in kilowatts or Megawatts. The primary source of demand is the power-consuming equipment of customers.
What is maximum demand?
The greatest of all demands of the load that has occurred within a specified period of time.
What is non-coincidental peak load?
The sum of two or more peak loads on individual systems that do not occur in the same time interval. Meaningful only when considering loads within a limited period of time, such as a day, week, month, a heating or cooling season, and usually for not more than 1 year.
What is the off-peak/on-peak?
Block of time when energy demand and price is low (off-peak) or high (on-peak).
What is peak demand?
The maximum load during a specified period of time.
What is peaking capacity?
Capacity of generating equipment normally reserved for operation during the hours of highest daily, weekly or seasonal loads. Some generating equipment may be operated at certain times as peaking capacity and at other times to serve loads on an around-the-clock basis.
What is reliability?
The ability to deliver uninterrupted electricity to customers on demand and to withstand sudden disturbances such as short circuits or loss of major system components. This encompasses the reliability of the generation system and of the transmission and distribution system. Reliability may be evaluated by the frequency, duration and magnitude of any adverse effects on consumer service.
What is a wholesale customer?
Any entity that purchases electricity at the wholesale level, including municipal utilities, private utilities, rural electric cooperatives or government-owned utility districts. Wholesale customers purchase electricity from other wholesale suppliers to resell to their own retail customers.
Understanding Energy Suppliers and Utilities
What is an affiliated retail electric provider?
A Retail Electric Provider (REP) that is owned, but separately operated, by a former monopoly electric utility.
What is the California Power Exchange?
The California Power Exchange Corporation (a.k.a. "CPX"), a State chartered, non-profit corporation charged with providing Day-Ahead and Hour-Ahead markets for energy and ancillary services, if it chooses to self-provide, in accordance with the power exchange tariff. The power exchange is a Scheduling Coordinator and is independent of both the Independent System Operator and all other market participants.
What is a Cooperative (Co-Op)?
Rural electric cooperatives generate and/or purchase wholesale power, arrange for the transmission of that power, and then distribute the power to serve the demand of rural customers. Co-ops typically become involved in ancillary services such as energy conservation, load management and other demand-side management programs in order to serve their customers at the least cost. (All Co-ops do not necessarily generate electricity.)
What is a default service?
The electric generation service provided to any consumer who does not or is not unable to arrange for or maintain electric generation services with an electric supplier.
What is a delivering party?
The entity supplying the capacity and/or energy to be transmitted at Point(s) of Receipt.
What is an electric distribution company (EDC)?
The company that owns the power lines and equipment necessary to deliver purchased electricity to the customer.
What is an electric service provider?
An entity that provides electric service to a retail or end-use customer.
What is an electric supplier?
An entity (including an energy marketer or energy services company – or ESCO) licensed or approved by a state utility regulatory agency to provide electricity supply to consumers. With energy choice, consumers can choose their electric supplier. The energy is then delivered by the consumer's utility distribution company.
What is an electric utility?
A corporation, agency, or authority that owns and/or operates facilities within the United States, its territories, or Puerto Rico for the generation, transmission, distribution, or sale of electric energy primarily for use by the public and files forms listed in the Code of Federal Regulations, Title 18, Part 141. Facilities that qualify as co-generators or small power producers under the Public Utility Regulatory Policies Act (PURPA) are not considered electric utilities.
What is an energy services company (ESCO)?
A company offering electricity, specialized or customized energy services by providing advice and products to customers.
What is a generation company?
A regulated or nonregulated entity (depending upon the industry structure) that operates and maintains existing generating plants. The generation company may own the generation plants or interact with the short-term market on behalf of plant owners. In the context of restructuring the market for electricity, the generation company is sometimes used to describe a specialized "marketer" for the generating plants formerly owned by a vertically integrated utility.
What is an independent power producer (IPP)?
Wholesale electricity producers (other than qualifying facilities under the Public Utilities Regulatory Policies Act of 1978) that are unaffiliated with franchised utilities in the area in which the independent power producers are selling power and that lack significant marketing power. Unlike traditional electric utilities, independent power producers do not possess transmission facilities that are essential to their customers and do not sell power in any retail service territory where they have a franchise. An entity not regulated by the government as a public utility that owns or operates an electricity generating facility and offers wholesale electric power for sale to utilities.
What is an independent system operator (ISO)?
An independent management team setup to run transmission systems owned by two or more entities. Under the arrangement, owners retain title to their assets and the ISO runs the systems as a joint operation. The ISO files a single transmission tariff for the region, plans and schedules transmission outages, takes a lead role in transmission system planning, collects transmission charges and makes payments to the actual providers. An independent entity that controls a power grid to coordinate the generation and transmission of electricity and ensure a reliable power supply. In current models, ISOs would be independent of states' utilities and would be regulated by the FERC.
What is an investor-owned utility (IOU)?
A utility operated by a public corporation that generates, transmits and distributes electric energy for a profit. An electric utility company owned and operated by private investors.
What is a local distribution company (LDC)?
A business entity that obtains its primary revenues from the operations of a local retail gas distribution system and operates no transportation system other than connections within its own system or to the system of another company. Most often, an LDC is a utility.
What is a municipal utility?
Also known as a municipally owned electric system. A provider of utility services owned and operated by a municipal government. A municipal utility is owned and operated by a city. In most cases, municipal utility rates are set at the city level, either by the municipal administration or by a local utility board or commission. In some limited circumstances, state-level regulations apply. Municipal utilities often have access to low-cost power from federal hydroelectric projects and can obtain low interest loans, and they are exempt from income and other taxes at the federal and state levels. These factors contribute to lower financing costs for plant and equipment. Municipal utilities serve roughly 14 percent of the nation's electric customers.
What is a municipally owned utility (Muni)?
A non-profit utility that is owned and operated by the municipality it serves.
What is a non-utility power producer?
A corporation, person, agency, authority or other legal entity or instrumentality that owns electric generating capacity and is not an electric utility. Nonutility power producers include qualifying cogenerators, qualifying small power producers, and other nonutility generators (including independent power producers) without a designated franchised service area, and which do not file forms listed in the Code of Federal Regulations, Title 18, Part 141.
What is a power generation company?
A competitive company that operates and maintains existing generation plants. The company may own the generation plants or may interact with the short-term market for electric power on behalf of plant owners.
What is Provider Of Last Resort?
The POLR will serve customers in areas open to competition on January 1, 2002, where the Retail Electric Provider (REP) of choice fails to continue service. The PUCT rules provide that POLR's must offer a firm, non-discountable, seasonally differentiated rate to any of three consumer classes: residential, small nonresidential, and large nonresidential. The POLR service is not supposed to be competitive, innovative or anything other than basic standard service.
What is a qualifying facility (QF)?
A small power producer or cogenerator that meets PURPA guidelines and qualifies to supply generating capacity to electric utilities, which must purchase this power at a price approved by state PUCs.
What is a retail electric provider (REP)?
An entity that sells electric energy to retail customers in Texas. A retail electric provider may not own or operate generation assets.
What is a rural electric cooperative (Co-op)?
In the United States, a rural electric cooperative, also called a cooperatively owned electric utility, is a customer-owned utility created to transmit and distribute power in rural areas. Rural electric cooperatives benefit from below-market financing from the Rural Utilities Service (formerly the Rural Electrification Administration), as well as low-cost power from federal hydroelectric projects. In addition, most do not pay state or federal income taxes. Typically, a board of directors sets the rates for rural electric cooperatives elected from among the cooperative's members. Today, rural electric cooperatives serve about 11 percent of U.S. electric customers.
What are shareholder-owned electric utilities?
U.S. public utilities owned by shareholders, organized as corporations, and regulated by Federal Energy Regulatory Commission and state public utilities commissions. About three-quarters of all Americans receive electric service from shareholder-owned electric utilities.
What is a small power producer (SPP)?
Under the Public Utility Regulatory Policies Act (PURPA), a small power production facility (or small power producer) generates electricity using waste, renewable (water, wind and solar), or geothermal energy as a primary energy source. Fossil fuels can be used, but renewable resource must provide at least 75 percent of the total energy input. (See Code of Federal Regulations, Title 18, Part 292.)
What is a supplier?
When it comes to understanding energy, the definition of a supplier is the company that supplies energy to its customers. They are responsible for managing the rates their customers pay for a service like electricity or natural gas, while the utility is responsible for the delivery of the service.
What is a transmission and distribution company?
The regulated affiliate of a former monopoly electric utility that owns and may construct and maintain wires used to transmit wholesale electric power. It is regulated by the Public Utility Commission to provide nondiscriminatory connections, comparable service and cost recovery. May also be referred to as the "wires company.”
What is a transmitting utility?
This is a regulated entity, which owns, and may construct and maintain, wires used to transmit wholesale power. It may or may not handle the power dispatch and coordination functions. It is regulated to provide non-discriminatory connections, comparable service, and cost recovery. According to EPACT, this includes any electric utility, qualifying cogeneration facility, qualifying small power production facility, or federal power marketing agency, which owns or operates electric power transmission facilities which are used for the sale of electric energy at wholesale.
What is a utility?
A utility is the company that is charged with the task of delivering energy sources to energy users. While you might be able to choose a supplier based on rates and plans available, the service, maintenance, and customer service, the energy source itself will come from the utility.
What are utility or utility distribution companies?
The entities that continue to provide regulated services for the distribution of electricity to customers and serve customers who do not choose direct access. Regardless of where a consumer chooses to purchase power, the customer's current utility, also known as the utility distribution company, will deliver the power to the consumer's home or business.?
Understanding Energy Markets
What is above-market generation?
Electricity produced at costs higher than prevailing market prices.
What is avoided cost?
The cost to the utility if it had generated or otherwise purchased the power. It is a benchmark price for energy services, used to compare resource alternatives. Avoided cost is the marginal long-term or short-term production cost that could be avoided by an alternative supply-side or demand-side resource. In many states, avoided cost rates have been used as the power purchase price offered to independent suppliers (co-generators).
What is a bilateral agreement?
Written statement signed by a pair of communicating parties that specifies what data may be exchanged between them.
What is a bilateral contract?
A contract agreement between two willing parties. In a competitive electric market, bilateral contracts would be agreements between suppliers and customers that specify the terms and conditions for pricing and delivery of electric service. A contractual system between a buyer and a seller to obtain generation and/or ancillary services of a given type, duration, timing and reliability over a contractual term.
What is a broker?
A firm that acts as an agent or "middleman" in the sale and purchase of electricity, but never owns the electricity and typically does not own generating facilities.
What is the bulk power market?
A market where wholesale purchases and sales of electricity are made.
What is a contract for differences?
A financial instrument used to hedge against the daily or hourly fluctuating prices that would be offered by an ISO or a "power exchange." A customer would be able to purchase a financial hedge from another party who may or may not have contractual rights to any specific generation.
What is a contract price?
Price of fuels marketed on a contract basis covering a period of 1 or more years. Contract prices reflect market conditions at the time the contract was negotiated and therefore remain constant throughout the life of the contract or are adjusted through escalation clauses. Generally, contract prices do not fluctuate widely.
What are contract receipts?
A purchase based on a negotiated agreement that generally covers a period of 1 or more years.
What is the day-ahead market?
The forward market for energy and ancillary services to be supplied during the settlement period of a particular trading day that is conducted by the Independent System Operator, the power exchange and other Scheduling Coordinators. This market closes with the Independent System Operator's acceptance of the final day-ahead schedule.
What is a day-ahead schedule?
A schedule prepared by a Scheduling Coordinator or the Independent System Operator before the beginning of a trading day. This schedule indicates the levels of generation and demand scheduled for each settlement period that trading day.
What is a delivering party?
The entity supplying the capacity and/or energy to be transmitted at Point(s) of Receipt.
What are demand-side management costs?
The costs incurred by the utility to achieve the capacity and energy savings from the Demand-Side Management Program. Costs (expenditures) incurred by consumers or third parties are to be excluded. The costs are to be reported in nominal dollars in the year in which they are incurred, regardless of when the savings occur. Program costs include expended items incurred to implement the program, incentive payments provided to consumers to install Demand-Side Management measures, and annual operation and maintenance expenses incurred during the year. Utility costs that are general, administrative or not specific to a particular Demand-Side Management category are to be included in "other" costs.
What is divestiture?
The stripping off of one utility function from the others by selling (spinning-off) or in some other way changing the ownership of the assets related to that function. Stripping off is most commonly associated with spinning-off generation assets so they are no longer owned by the shareholders that own the transmission and distribution assets.
What is an exempt wholesale generator?
Created under the 1992 Energy Policy Act, these wholesale generators are exempt from certain financial and legal restrictions stipulated in the Public Utilities Holding Company Act of 1935.
What is firm power?
Power or power-producing capacity intended to be available at all times during the period covered by a guaranteed commitment to deliver, even under adverse conditions.
What are native load customers?
The wholesale and retail customers on whose behalf the Transmission Provider, by statute, franchise, regulatory requirements, or contract, has undertaken an obligation to construct and operate the Transmission Provider's system to meet the reliable electric needs of such customers.
What is non-firm power?
Power or power-producing capacity supplied or available under a commitment having limited or no assured availability.
What is non-firm transmission service?
Point-to-point transmission service that is reserved and/or scheduled on an as-available basis and is subject to interruption. Non-firm Transmission Service is available on a stand-alone basis as either Hourly Non-firm Transmission Service or Short-Term Non-firm Transmission Service.
What is a fixed price?
A price, usually per kilowatt-hour, that remains the same over the term of the contract.
What is a fixed rate?
A fixed charge for goods and services that does not vary with changes in the amount used, volume consumed or units purchased.
What are fuel expenses?
These costs include the fuel used in the production of steam or driving another prime mover for the generation of electricity. Other associated expenses include unloading the shipped fuel and all handling of the fuel up to the point where it enters the first bunker, hopper, bucket, tank or holder in the boiler-house structure.
What is a futures market?
Arrangement through a contract for the delivery of a commodity at a future time and at a price specified at the time of purchase. The price is based on an auction or market basis. This is a standardized, exchange-traded and government regulated hedging mechanism.
What are hedging contracts?
Contracts which establish future prices and quantities of electricity independent of the short-term market. Derivatives may be used for this purpose.
What is an hourly non-firm transmission service?
Point-to-point transmission that is scheduled and paid for on an as-available basis and is subject to interruption.
What is interruptible gas?
Gas sold to customers with a provision that permits curtailment or cessation of service at the discretion of the distributing company under certain circumstances, as specified in the service contract.
What is an interruptible load?
Refers to program activities that, in accordance with contractual arrangements, can interrupt consumer load at times of seasonal peak load by direct control of the utility system operator or by action of the consumer at the direct request of the system operator. It usually involves commercial and industrial consumers. In some instances the load reduction may be affected by direct action of the system operator (remote tripping) after notice to the consumer in accordance with contractual provisions. For example, loads that can be interrupted to fulfill planning or operation reserve requirements should be reported as Interruptible Load. Interruptible Load as defined here excludes Direct Load Control and Other Load Management. (Interruptible Load, as reported here, is synonymous with Interruptible Demand reported to the North American Electric Reliability Council on the voluntary Form EIA-411, "Coordinated Regional Bulk Power Supply Program Report," with the exception that annual peak load effects are reported on the Form EIA-861 and seasonal (i.e., summer and winter) peak load effects are reported on the EIA-411).
What is an interruptible rate?
A special utility rate given to certain industrial customer who agrees to have their service reduced or temporarily stopped as part of an agreement with their electric provider.
What is a market clearing price?
The price at which supply equals demand for the Day Ahead and/or Hour Ahead Markets.
What are market participants?
Any parties or agents who participate in the electrical energy marketplace through either the buying or selling of electrical energy or services.
What is market power?
When one company owns a sufficiently large percentage of generation, transmission, or distribution capabilities in a region to allow it to influence the price of electricity by forcing the purchase of its own power.
What is a monopoly?
One seller of electricity with control over market sales.
What is a natural monopoly?
A natural monopoly arises when there are very large "economies of scale", so that the larger the quantity that a single factory produces, the cheaper the average costs per unit get. This might occur when production requires extremely large initial capital investments to enter the market but additional output requires only very modest additional outlays beyond the fixed initial investment. Under such circumstances, the firm with the largest share of the market is in a position to price its output at a level below its competitors' costs of production and still make a profit while driving them out of the business - and the larger its market share gets, the lower its unit costs become, until a monopoly position is finally obtained. (It is often argued that local telephone service, natural gas supply, and electrical power distribution fall into this category because of the heavy initial investments in networks of telephone lines, electrical lines and gas lines that are involved.). According to economic theory, a public monopoly governed by regulation is justified when an industry exhibits natural monopoly characteristics.
What is the Open Access Same-Time Information System (OASIS)?
OASIS is a real-time information-sharing system that enables all buyers and sellers of electricity to access the transmission costs for all other buyers and sellers. This system is designed to ensure that transmission owners and their affiliates do not have an unfair advantage in using transmission to sell power.
What is performance based ratemaking (PBR)?
Under performance-based ratemaking, rates for utility service would no longer be based on cost-of-service, but instead on performance standards and market indices. PBR allows a utility greater flexibility to manage the costs of its electric system and to price its power at competitive levels by taking the market risk for recovering the revenues.
What is a power marketer?
An entity, such as a supply coordinator or broker, that obtains energy from any source or combination of sources, including independent generators, utility system power or spot purchases, for delivery to a utility or end user.
What is a price cap?
A level above, which regulated prices, may not rise.
What is the price to beat?
Retail Electric Providers affiliated with pre-existing investor-owned utilities are required to offer residential and small commercial customers in its former service area a "price to beat." This is a price that is 6% lower than the rate charged by its affiliated electric utility on January 1, 1999. The Retail Electric Provider cannot adjust this price until either (a) 36 months after retail competition is introduced or (b) 40 percent of the customers in its affiliated Transmission and/or Distribution Service Provider area have switched to another retailer.
What is price transparency?
Market prices for generation and transmission service made available to the public so that customers know how much they will pay for power supply and transportation in a deregulated market.
What is purchased capacity?
The amount of power available for purchase from outside the system to supply energy or capacity.
What is a rate base?
The value of property upon which a utility is permitted to earn a specified rate of return as established by a regulatory authority. The rate base generally represents the value of property used by the utility in providing service and may be calculated by any one or a combination of the following accounting methods: fair value, prudent investment, reproduction cost, or original cost. Depending on which method is used, the rate base includes cash, working capital, materials and supplies, and deductions for accumulated provisions for depreciation, contributions in aid of construction, customer advances for construction, accumulated deferred income taxes, and accumulated deferred investment tax credits.
What are renewable energy credits?
Renewable energy credits are blocks of energy that were produced by renewable energy options. Households can purchase a portion of their energy supply through renewable energy to help make their personal carbon footprint just a little smaller.
What is retail?
Sales covering electrical energy supplied for residential, commercial and industrial end-use purposes. Other small classes, such as agriculture and street lighting, also are included in this category.
What is retail competition?
The concept under which multiple sellers of electric power can sell directly to end-use customers and the process and responsibilities necessary to make it occur.
What are retail customers?
Customers, including residences and businesses, who themselves use the electricity they purchase; also referred to as end-use customers.
What is the retail market?
A market in which electricity and other energy services are sold directly to the end-use customer.
What is retail wheeling?
A transmission or distribution service by which utilities deliver electric power sold by a third party directly to retail customers. This would allow an individual retail customer to choose an electricity supplier but still receive electricity using the power lines of the local utility.
What are scheduling coordinators?
Entities certified by the Federal Energy Regulatory Commission that act as a go-between with the Independent System Operator on behalf of generators, supply aggregators (wholesale marketers), retailers and customers to schedule the distribution of electricity.
What are spot purchases?
A single shipment of fuel or volumes of fuel, purchased for delivery within 1 year. Spot purchases are often made by a user to fulfill a certain portion of energy requirements, to meet unanticipated energy needs or to take advantage of low-fuel prices.
What is a spot market?
Short-term purchases of electricity from surpluses available for a short time.
What is a spot price?
The price for a one-time open market transaction for immediate delivery of the specific quantity of product at a specific location where the commodity is purchased "on the spot" at current market rates.
What are stranded benefits?
Benefits associated with regulated retail electric service, which may be at risk under open market retail competition. Examples are conservation programs, fuel diversity, reliability of supplyand tax revenues based on utility revenues.
What is a stranded cost?
A "stranded cost" occurs when customers of one utility are allowed to have power brought to them from some other supplier, thereby leaving the original utility with debts for plants and equipment it no longer needs and without the revenue from the ratepayers the plants were built to serve. All potentially stranded costs are the result of decisions that were reviewed and approved by government regulators and were made by utilities under the unique regulatory contract with their state and their customers.
What are stranded costs/stranded assets?
Costs incurred by a utility that may not be recoverable under market-based retail competition. Examples are undepreciated generating facilities, deferred costs and long-term contract costs. They represent a utility's capital investments that are unrecoverable because of the transition to competition. The rationale for allowing stranded cost recovery is that utilities have made large investments in facilities under a regulatory system that allowed cost recovery of all prudent investments.
What are stranded investments or stranded costs?
The difference between the book value of generation facilities under a regulated system and what those facilities would be worth on the open market. In a traditional regulated rate of return system, electric utilities could recover the costs of building generation facilities, over time, on customers' bills.
What is a tariff?
A collection of public schedules detailing utility cost-of-service rates, rules, service territory and terms of service that a regulated utility files with its public utilities commission for official approval. Tariffs approved by a public utilities commission are binding legal documents and must be made available to the public. In effect, they constitute the contract between a utility and its customers.
What are transition costs?
Above-market utility costs that have not yet been recovered through rates. These costs would become "stranded" in the move to a competitive market. They include: utility-owned above-market generation costs, non-utility-owned above-market generation costs, such as power purchased from QFs, and costs known as regulatory assets, such as deferred taxes.
What is a variable price?
A price that can change by the hour, day or month.
What is a wellhead price?
The price of oil or natural gas at the mouth of the well.
What is wholesale competition?
A market structure in which wholesale electricity suppliers compete to sell electricity to retail providers over regulated transmission and distribution systems. This system allows a distributor of power to have the option to buy its power from a variety of power producers, and the power producers would be able to compete to sell their power to a variety of distribution companies.
What are wholesale transmission services?
The transmission of electric energy sold, or to be sold, at wholesale in interstate commerce (from EPACT).
What is a wholesale power market?
The purchase and sale of electricity from generators to resellers (who sell to retail customers), along with the ancillary services needed to maintain reliability and power quality at the transmission level.
What is wholesale wheeling?
The process of sending electricity from one utility to another wholesale purchaser over the transmission lines of an intermediate utility. Under the U.S. Energy Policy Act of 1992, utilities must provide wholesale transmission wheeling services to any electric utility, federal power marketing agency, or other company generating electric energy for sale in the wholesale market.
Understanding Energy Regulations
What is cost-of-service regulation?
Traditional electric utility regulation under which a utility is allowed to set rates based on the cost of providing service to customers and the right to earn a limited profit.
What is an electric rate schedule?
A statement of the electric rate and the terms and conditions governing its application, including attendant contract terms and conditions that have been accepted by a regulatory body with appropriate oversight authority.
What is EPACT?
The Energy Policy Act of 1992 addresses a wide variety of energy issues. The legislation creates a new class of power generators, exempt wholesale generators, that are exempt from the provisions of the Public Holding Company Act of 1935 and grants the authority to the Federal Energy Regulatory Commission to order and condition access by eligible parties to the interconnected transmission grid.
What is the Federal Energy Regulatory Commission (FERC)?
The Federal Energy Regulatory Commission regulates the price, terms, and conditions of power sold in interstate commerce and regulate the price, terms and conditions of all transmission services. FERC is the federal counterpart to state utility regulatory commissions. For example, FERC sets and enforces the wholesale electric rates that investor-owned utilities charge rural electric cooperatives and other wholesale customers; also licenses hydroelectric projects.
What is the North American Electric Reliability Council (NERC)?
The Northern American Electric Reliability Council. An association for regional councils, which provides coordination and planning. A non-profit organization formed by the electric utility industry to ensure a reliable, adequate power supply in North America. NERC plays an important role in establishing the standards, rules and forms of cooperation that contribute to system reliability. NERC was formed in 1969 and consists of 10 regional councils comprised of individual electric utilities in the United States, Canada and Mexico. The transmission systems of the members of these regional councils interconnect, creating flexible regional systems that allow the transfer of power among areas to maintain one of the world's most reliable electric systems. NERC Regions are: ASCC - Alaskan System Coordination Council, ECAR - East Central Area Reliability Coordination Agreement, ERCOT - Electric Reliability Council of Texas, MAIN - Mid-America Interconnected Network, MAAC - Mid-Atlantic Area Council, MAPP - Mid-Continent Area Power Pool, NPCC - Northeast Power Coordinating Council, SERC - Southeastern Electric Reliability Council, SPP - Southwest Power Pool and WSCC - Western Systems Coordinating Council.
What is the public utilities commission?
The state regulatory agency that governs retail utility rates and practices and, in many cases, issues approvals for the construction of new generation and transmission facilities. On average, roughly 90 percent of a utility's operations are regulated by the state commission.
What is the Public Utility Regulatory Policies Act of 1978 (PURPA)?
The federal act outlines requirements for state utility commissions, electric utilities, independent power producers and certain federal regulatory agencies to encourage the use of alternative energy sources in the generation of electric power. The act created a market for independent power producers called qualifying facilities (QFs), requiring utilities to buy power from certain power providers.
What is the Public Utility Holding Company Act of 1935 (PUHCA)?
Act approved by the U.S. federal government that imposed restrictions on the large interstate-holding companies that controlled the nation's private utilities by limiting the activities of holding companies to utility operations in defined geographic areas. This led to vertically-integrated monopolies that owned the generating facilities, transmission lines and distribution systems in an exclusive service area.
What is the Standard Industrial Classification (SIC)?
Understanding Energy Choice
If I choose Constellation, will it impact my participation in state assistance programs that help me with my energy bill?
Participation in state assistance programs is not affected by your choice of Constellation as your energy supplier.?
If Constellation lowers its fixed price after I sign up, do I qualify for the new rate?
Your fixed rate will remain the same for the duration of the fixed-rate period in your contract. Information on our variable-rate plans is available through our zip code search to compare energy rates. Please see terms and conditions of each plan for more information.
Can I cancel my service with Constellation if I’m not satisfied?
Yes. If you are within a fixed-rate period on your plan, there may be an early termination fee (ETF) assessed. Check the terms and conditions of your contract for more details.?
How do I notify my utility that I am switching to an energy supplier?
When you switch to Constellation, we handle all the details of contacting your utility and letting them know that you have selected us as your energy supplier. You should receive a final bill with any services provided before switching and any cancellation fee as laid out in your previous contract.?
What is a customer charge?
Part of the monthly basic distribution charge to partially cover costs for billing, meter reading equipment, service line maintenance and equipment. This charge is the same no matter how much electricity you use.
What is customer choice?
The freedom of a retail customer to purchase electric services, either individually or through voluntary aggregation with other retail customers, from the provider(s) of the customer's choice and to choose among various rates and plans.
What is deregulation?
Deregulation is removing government regulations to change the way a service is managed. Removal or relaxation of regulations or controls governing a business or service operation such as utilities. In understanding energy choice, deregulation is what allows the competitive energy market to exist.
What is direct access?
An arrangement that gives customers the choice of buying electricity from any supplier in the competitive market. Under direct access, customers could buy power from any generator and use the transmission and distribution network to transport the electricity.
What are energy efficiency programs?
Refers to programs that are aimed at reducing the energy used by specific end-use devices and systems, typically without affecting the services provided. These programs reduce overall electricity consumption (reported in megawatt or kilowatt hours), often without explicit consideration for the timing of program-induced savings. Such savings are generally achieved by substituting technically more advanced equipment to produce the same level of end-use services (e.g. lighting, heating, motor drive) with less electricity. Examples include high-efficiency appliances, efficient lighting programs, high-efficiency heating, ventilating and air conditioning (HVAC) systems or control modifications, efficient building design, advanced electric motor drives, and heat recovery systems.
What is an energy aggregator?
An energy aggregator is any entity or organization that brings together energy users for the purpose of obtaining a better price for energy sources. A person joining two or more customers, other than municipalities and political subdivision corporations, into a single purchasing unit to negotiate the purchase of electricity from retail electric providers. Aggregators may not sell or take title to electricity. Retail electric providers are not aggregators.
What is an escape provision?
A contract clause allowing one to break a contract, usually with a penalty.
What is an informal complaint?
A dispute or disagreement about a utility problem filed by a consumer with the PUC's Customer Protection Division. A Customer Assistance investigator reviews the informal complaint and tries to resolve the dispute. Most responses are in the form of a decision that the customer or company can appeal. If an informal complaint is appealed, it becomes a formal complaint.
What is the obligation to serve?
Under traditional regulation, it is the duty of a regulated utility to provide service to all customers in its service territory on a non-discriminatory basis.
What is open access?
Gives all customers equal opportunity to the grid.
What is a service obligation?
Refers to the duties a regulated public utility must perform for its customers. Service obligation includes the duty to serve all prospective customers, to provide adequate, reliable service and to render safe, efficient and nondiscriminatory service.
What is slamming?
Switching a customer's electric provider without authorization.
What are terms of service?
Content of the agreement between a customer and a Retail Electric Provider (REP).
Will my local utility treat me differently if I buy power from an alternate energy provider?
Utilities are required by regulation to provide the same quality of service to customers of all of the suppliers that they service.?
Will Constellation need to replace any existing electrical or natural gas service components such as service wires, transformers, meters or pipelines at my location??
Not at all. Your service will continue to be provided by your current utility. All wires, meters, pipelines and other equipment will remain in place and maintained by your utility.
Is my personal information safe with Constellation?
Absolutely. Constellation has a statement within our terms and conditions explaining our policies about personal information. Personal information is only shared with utility representatives, subcontractors and those who need it as it relates to your energy services.
Understanding Bills and Payments
What is a base bill?
A charge calculated through multiplication of the rate from the appropriate electric rate schedule by the level of consumption.
What is a capacity charge?
An element in a two-part pricing method used in capacity transactions (energy charge is the other element). The capacity charge, sometimes called Demand Charge, is assessed on the amount of capacity being purchased and expressed in $/kW-month or $/MW-day. You can manage this rate by using off-peak times to do high-energy-use activities and by reducing your energy usage during peak times.
What is the contract price?
The contract price of your bill is the rate that you locked in at the time you entered into the contract. This rate will remain the same throughout your contract period.
What is a competitive transition charge (CTC)?
A competitive transition charge is a fee that allows the utility to recoup some of the costs and losses that are associated with the deregulation of the energy industry. It is typically based on a household’s energy usage.
What defines energy consumption?
Energy consumption is defined by the amount of energy that is used by a home or business for power or heating within a specific period of time.
What is an electric rate schedule?
An electric rate schedule is the document that shows what is to be paid as an electric rate, plus all related terms and conditions. The electric rate schedule must be approved by any regulating agencies a supplier is under within a state or locale.
What is an energy charge?
That portion of the charge for electric service based upon the electric energy that was consumed or billed. The energy charge is usually measured in kilowatt-hours (kWh).
What is a fixed-rate plan?
A fixed-rate plan ensures that you pay the same rate for the term of the contract. If rates go up or down, fixed-rate customers will not be affected.
What is a fuel charge?
The rate charged per kilowatt-hour (or cubic feet) to cover the costs of the fuel used to produce power (or gas).
What is hourly metering or time of use metering?
Tracking or recording your consumption during a specific time period.
What is pancaking?
The effect of adding on charges as power moves through several transmission systems.
What is purchased power adjustment?
A clause in a rate schedule that provides for adjustments to the bill when energy from another electric system is acquired and it varies from a specified unit base amount.
What is a service agreement?
The initial agreement and any supplements thereto entered into by the Transmission Customer and the Transmission Provider for service.
What are time of use (TOU) rates?
The pricing of electricity based on the estimated cost of electricity during a particular time block, either time-of-day or by season.
What are transmission charges?
Part of the basic service charges on every customer's bill for transporting electricity from the generation facility over transmission lines.
What is unbundled service?
This is electric service broken down into its basic components. Each component is priced and sold separately. For example, generation, transmission and distribution could be unbundled.
What is unbundling?
The separating of the total process of electric power service from generation to metering into its component parts for the purpose of separate pricing or service offerings that results in "unbundled service."
What is a variable plan?
If you’re under a variable plan, you pay a rate for your energy sources based on the current local market price for electricity or natural gas. Rates could change month to month, unlike a fixed-rate plan.
What is a wires charge?
A charge that could be expressed in cents-per-kilowatt hour that is levied on consumers to use the transmission and distribution system. This is also referred to as a "transmission and distribution charge."